Basic Info.
Usage
Corrosive Gases Delivery
Transport Media
Hydrogen or Biogas
Connection
V-Belt or Coupling
Flow Capacity
10-20m3/Min
Pressure Rise Maximum
98 Kpa
Transport Package
Standard Wooden Package
Specification
1250*850*1200
Product Description
Material Specifications:
Housing: Cast iron
End Plates: Cast iron
End Cover: Cast iron
Rotors: Ductile iron
Shafts: Ductile iron, cast integrally with rotors
Bearings: Gear end - Double row ball, both rotors
Drive end - Cylindrical roller on drive rotor
Single row ball on driven rotor
Drive Shaft: Ductile iron
Gears: Heat treated alloy steel, helical cut
Seals: Lip seals on rotor shafts and drive shaft
Lubrication: Oil splash on gear end, grease on drive end
Models available with dual oil splash lubrication
Product Description
RH Roots Blower is exquisitely designed and fabricated according to the national and industry standards by our extensive experienced technicians . we are one of the industrial benchmark drafters in roots blower industry.
Place of origin:China
Port:Shanghai
Diameter: DN125
Flow Capacity:20-33m3/min
Pressure:up to 78kpa
Noise:less than 82dB(A)
cooling type: water cooling or air cooling
motor:7.5kw-45kw IP55 380V/415V 50HZ
Accessories: inlet silencer, outlet silencer, check valve, flexible joint,pressure gauge
connection: direct coupling or V-belt driven
Detailed Photos
Installation Instructions
•Do not start up the unit before reading the instruction manual.
•Disconnect the power supply when you need to work with the machine or one of its components.
•Use suitable protection and the equipment necessary for any possible hazards arising from the operation or installation of this machine
•Keep your body and clothes away from the rotating machinery and the intake and exit openings of air or gases to be propelled.
•Without a cabin, ears must be protected from noise levels.
•The temperatures generated by compression within the blower can cause burns.
•The protection for the drive must always be attached and fitted correctly. If, for any reason, the unit is to be disassembled, it must be stopped beforehand.
•The mountings for the blower, motor and accessories must be inspected regularly.
•If the blower unit incorporates a soundproof cabin, it will not start up until all of the panels and the door have been positioned correctly and closed. If it is necessary to move the panel where the fan is located, it must always have stopped before removal.
•In order to avoid shock from static electricity, connect the earths for both the muffler bed and the soundproof cabin, as necessary (see diagram). The earth connection must made using a cable with a minimum diameter of 16 mm2.
•Do not use the blower unless these limits regarding operating conditions are fulfilled.
•An emergency stop button must be provided so the blower can be stopped if necessary.
•Never start up the blower when either the suction or thrust clamps, or both, are open.
Our Advantages
Nantong Rongheng Environmental Equipment Company is one of the earliest industrial blower manufacture in China since 1993, a state high tech enterprises with decades experience in blower industry. Our customers are world wide including from Russia, Pakistan, India,Vietnam,Sri Lanka, Argentina,Costa Rica,South Africa etc
Parameter:Model | Speed(n) | △P | air flow(Q) | Shaft power | Motor | Weight |
r/min | kPa | mmH2O | m3/min | kW | model | kW | kg |
RH12542 | 980 | 9.8 | 1000 | 13.1 | 4.1 | Y2-132M2-6 | 5.5 | 624 |
19.6 | 2000 | 12.4 | 6.3 | Y2-160M-6 | 7.5 | 658 |
29.4 | 3000 | 11.8 | 8.5 | Y2-160L-6 | 11 | 685 |
39.2 | 4000 | 11.2 | 10.7 | Y2-180L-6 | 15 | 735 |
49 | 5000 | 10.6 | 12.9 | Y2-180L-6 | 15 | 735 |
58.8 | 6000 | 10.2 | 15.1 | Y2-200L1-6 | 18.5 | 760 |
68.6 | 7000 | 9.8 | 17.2 | Y2-200L1-6 | 18.5 | 760 |
78.4 | 8000 | 9.3 | 19.5 | Y2-200L2-6 | 22 | 790 |
88.2 | 9000 | 8.4 | 21.7 | Y2-225M-6 | 30 | 832 |
98 | 10000 | 7.9 | 23.9 | Y2-225M-6 | 30 | 832 |
1100 | 9.8 | 1000 | 15.1 | 4.6 | Y2-132S-4 | 5.5 | 607 |
19.6 | 2000 | 14.3 | 7.1 | Y2-160M-4 | 11 | 664 |
29.4 | 3000 | 13.6 | 9.5 | Y2-160M-4 | 11 | 664 |
39.2 | 4000 | 13.2 | 12.0 | Y2-160L-4 | 15 | 685 |
49 | 5000 | 12.7 | 14.6 | Y2-180M-4 | 18.5 | 720 |
58.8 | 6000 | 12.3 | 17.1 | Y2-180M-4 | 18.5 | 720 |
68.6 | 7000 | 11.9 | 19.7 | Y2-180L-4 | 22 | 740 |
78.4 | 8000 | 11.2 | 22.3 | Y2-200L-4 | 30 | 810 |
1200 | 9.8 | 1000 | 16.4 | 5.0 | Y2-132M-4 | 7.5 | 621 |
19.6 | 2000 | 15.7 | 7.7 | Y2-160M-4 | 11 | 664 |
29.4 | 3000 | 15.4 | 10.4 | Y2-160L-4 | 15 | 685 |
39.2 | 4000 | 14.7 | 13.1 | Y2-160L-4 | 15 | 685 |
49 | 5000 | 14.3 | 15.8 | Y2-180M-4 | 18.5 | 720 |
58.8 | 6000 | 13.8 | 18.5 | Y2-180L-4 | 22 | 740 |
68.6 | 7000 | 13.4 | 21.3 | Y2-200L-4 | 30 | 810 |
78.4 | 8000 | 12.7 | 24.1 | Y2-200L-4 | 30 | 810 |
1310 | 9.8 | 1000 | 18.1 | 5.5 | Y2-132M-4 | 7.5 | 621 |
19.6 | 2000 | 17.4 | 8.4 | Y2-160M-4 | 11 | 664 |
29.4 | 3000 | 16.7 | 11.4 | Y2-160L-4 | 15 | 685 |
39.2 | 4000 | 16.2 | 14.4 | Y2-180M-4 | 18.5 | 720 |
49 | 5000 | 15.6 | 17.4 | Y2-180M-4 | 18.5 | 720 |
58.8 | 6000 | 15.2 | 20.4 | Y2-180L-4 | 22 | 740 |
68.6 | 7000 | 14.9 | 23.5 | Y2-200L-4 | 30 | 810 |
78.4 | 8000 | 14.3 | 26.6 | Y2-200L-4 | 30 | 810 |
RH12542 | 1450 | 9.8 | 1000 | 20.1 | 6.1 | Y2-132M-4 | 7.5 | 621 |
19.6 | 2000 | 19.4 | 9.5 | Y2-160M-4 | 11 | 664 |
29.4 | 3000 | 18.9 | 12.8 | Y2-160L-4 | 15 | 685 |
39.2 | 4000 | 18.3 | 16.2 | Y2-180M-4 | 18.5 | 720 |
49 | 5000 | 17.7 | 19.5 | Y2-180L-4 | 22 | 740 |
58.8 | 6000 | 17.4 | 22.9 | Y2-200L-4 | 30 | 810 |
68.6 | 7000 | 17.1 | 26.3 | Y2-200L-4 | 30 | 810 |
78.4 | 8000 | 16.7 | 29.7 | Y2-225S-4 | 37 | 824 |
88.2 | 9000 | 15.9 | 33.1 | Y2-225S-4 | 37 | 824 |
98 | 10000 | 15.0 | 36.6 | Y2-225M-4 | 45 | 860 |
1600 | 9.8 | 1000 | 22.3 | 6.9 | Y2-160M-4 | 11 | 664 |
19.6 | 2000 | 21.5 | 10.8 | Y2-160L-4 | 15 | 685 |
29.4 | 3000 | 20.8 | 14.7 | Y2-180M-4 | 18.5 | 720 |
39.2 | 4000 | 20.4 | 18.6 | Y2-180L-4 | 22 | 740 |
49 | 5000 | 19.9 | 22.5 | Y2-200L-4 | 30 | 810 |
58.8 | 6000 | 19.2 | 26.5 | Y2-200L-4 | 30 | 810 |
68.6 | 7000 | 19.3 | 30.3 | Y2-225S-4 | 37 | 824 |
Notes:
Pressure performance is based on inlet conditions of 14.70 PSIA (1.03 kg/sq cm) and 70°F (21°C). In conjunction with our program of continuous testing and upgrading, all specifications are subject to change without notice. All data are approximate. Request a quotation for your specific application.About RH
RH Roots Blower is exquisite designed and fabricated according to the national and industry standards by our rich experienced technicians . we are one of the industrial benchmark drafters in roots blower industry.
Address:
YUDONG INDUSTRIAL PARK, HAIMEN, NANTONG CITY, JIANGSU PROVINCE, CHINA
Business Type:
Trading Company
Business Range:
Agriculture & Food, Apparel & Accessories, Chemicals, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Packaging & Printing
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Nantong Rongheng environmental equipment Co., Ltd. is a national high-tech enterprise specialized in manufacturing environmental protection equipment and integrating R&D, manufacturing, sales and technical services.
After 30 years of professional experience, products cover: Roots type blower, Multistage Centrifugal Blower, Sliding vane blower, Turbo Blower, Air foil suspension blower, compressor, Rotary blower, Silencing products etc.
With technical competence, advanced design methods, superior facilities and complete test measure system, our enterprise is the most reliable professional manufacturer of industrial blower right now. Our technical team is the main author of the Industry standards-Chinese HJ/T251-2006 Specification for environmental protection product-Roots blower.